Grimmspeed Mazdaspeed Electronic Boost Controller Manuel d'utilisateur télécharger pdf (Page 9)

Grimmspeed

11. Port 2 connects to the internal wastegate actuator vacuum nipple. Remove oem hose on

top of actuator and replace with 4mm hose and bring 4mm hose to Port 2 on the BCS.

12. Port 1 should be routed back to the intake or left to vent to atmosphere. It is

recommended that a plastic zip tie is used to secure vacuum lines.

13. Tuning: WGDC controls the actuator / turbo. Tuning to the WGDC is required. Start at a

WGDC value of 15 and go up from there.

Installation for MazdaSpeed6:

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Grimmspeed Mazdaspeed Electronic Boost Controller Manuel d'utilisateur Page 9