Grimmspeed Heat Shield Manuel d'utilisateur télécharger pdf

Grimmspeed

GrimmSpeed Turbo Heat Shield

Installation Instructions

Subaru Application

All GrimmSpeed products are intended for Off-Road use only. Park your vehicle on a level surface. Fully engage the parking

brake and put wheel stops on the front and rear wheels to keep the vehicle from rolling.

Warning (read before installing):

Before moving forward with the setups outlined below, insure that you have the experience to properly modify your car. If

not, please consult a professional. Without a proper install you could possibly damage your engine. Under no circumstances

is the GrimmSpeed Turbo Heat Shield to be used in any applications where failure of the Heat Shield to operate as intended

could jeopardize the safety of the operator or any other person or property.

NOTE: The oem heat shield bolts may be rusted and may strip out of the brackets. If this happens to you, you can reorder by

calling your local Subaru dealer and ordering parts: Upper Heat Shield Bracket 44021AA012 and/or Lower Heat Shield Bracket

44021AA011.

Contents:

(1) GrimmSpeed Turbo Heat Shield

(3) M6 Bolts

Tools Needed:

10mm Combo Wrench

10mm Socket

3/8” Socket Wrench

1 2 3

Grimmspeed 1 GrimmSpeed Turbo Heat Shield Installation Instructions Subaru Application All GrimmSpeed products are intended for Off-Road use on

Grimmspeed 2 B. Installation 1. Remove the (7) bolts that secure the stock heat shield to the downpipe and up pipe. 2. Pull off stock

Page 3

Grimmspeed 3 3. Install GrimmSpeed Heat Shield by utilizing the (1) Up Pipe mount bracket bolt hole and (2) Downpipe bracket bolt holes. NOTE: Use c

Pas de commentaire

Grimmspeed Heat Shield Manuel d'utilisateur